Do you want a free, fun way to get your kids into their favorite songs?  These free holiday printables for toddlers are great for giving your kids little dancing buddies to help them sing and dance to the music! 

Below are detailed instructions on how to make the monkeys danceable! There is also a version that doesn’t require small parts, this is better for smaller children who are still in the eat-everything phase. If you want these monkeys to last longer, laminate them before you assemble them. 

The instructions are VERY THOROUGH. These are actually quite simple to make, I just wanted to make sure I gave enough detail if you want to make them exactly as I did. 

Thanks for stopping by, hope you enjoy the monkeys! If you want to check out the Original 5 Little Monkeys printables, click here. 

Disclaimer: As an Amazon Associate I earn from qualifying purchases. This means I get commissions for purchases made through links in this post at no extra cost to you. I do my best to only recommend products I have tried and would use again for these activities.

Assembly Instructions for Free Holiday Dancing Monkey Printables for Toddlers

 

Craft Supplies

 

Supplies

  • You’ll need the free holiday printables for your toddler. You can either print it on cardstock or print it on regular paper. I recommend cardstock as it will ensure the dolls are more resilient for playing. I prefer to print my stuff at FedEx because of the quality of the laser prints and their printers can handle the thicker paper better than my wimpy home printer.

 

 Assembly of the Arms

  • Cut out the monkey’s body. Keep track of the lettering on the body so you know where to place the limbs.  
  • Using the 1/16th hole punch, punch out holes at the shoulders (A and B). Center the hole roughly a 1/8th of an inch from the edge of the paper. You need enough space to keep the brad from ripping the paper.
  • Find the arm that has the letter A above it and C below it. Cut it out.
  • Punch holes at both ends of the arm centered a 1/8th of an inch from each end.
  • Match the A end of the arm with the A shoulder on the body of the monkey. Layer the arm beneath the shoulder so that the monkey’s shirt is in the forefront and visible.

 

 

  • Line up the holes,  place a brad in the hole. Make sure the brad head is on the front side while the clasp is on the blank backside.  Spread the clasp loosely–enough to keep it in place but loose enough to let the arm swing. Dancing monkeys require loose feet :).
  • Now find the small arm piece with the letter C  above it and the letter E below it.  Cut it out.
  • Punch holes at both ends of the small arm piece with the hole centered a 1/8th of an inch from each end.
  • Match the C end of the larger arm piece with the C  end of the smaller arm piece. Layer the large arm piece beneath the small arm piece so that the small arm piece is in the forefront.
  • Line up the holes,  place a brad in the hole. Make sure the brad head is on the front side while the clasp is on the blank backside.
  • Find the hand with the letter E below it. Cut it out.
  •  Punch a hole in the wrist area of the hand, centered between the three edges of the paper.
  • Match the E end of the small arm piece with the wrist on the E hand. Layer the small arm piece over the wrist so that the small arm piece is at the forefront.
  • Line up the holes, place a brad in the hole. Secure the clasps.
  • Repeat steps  2-14 using the large arm piece labeled B and D, the small arm piece labeled D and F, and the hand-labeled F.

    Assembly of the Legs

     

  • On the monkey’s body punch a hole in the center of the leg side G.
  • Cut out the large leg piece with a G above it and I below it.
  • Punch holes at both ends of the large leg piece.  Center the hole a 1/8th of an inch from each end.
  • Match the G on the large leg piece with the G on the leg area on the body. Layer the large leg piece under the leg area of the body so that the leg is in the forefront.
  • Line up the holes, place a brad in the hole. Secure the clasps.
  • Cut out the small leg piece with I above it and K below it.
  • Punch holes at both ends of the small leg piece.  Center the hole a 1/8th of an inch from each end.
  • Match the I end of the larger leg piece with the I end of the smaller leg piece. Layer the small leg piece beneath the large leg piece so that the small leg piece is in the forefront.
  • Line up the holes, place a brad in the hole. Secure the clasps.
  •  Find the foot with the letter K above it. Cut it out.
  • Punch a hole in the ankle area of the foot.
  • Match the K end of the small leg piece with the K on the ankle. Layer the small leg piece over the ankle so that the small leg piece is at the forefront.
  • Line up the holes, place a brad in the hole. Secure the clasps.
  • Repeat steps  16-28 using the large leg piece labeled H and J, the small leg piece labeled J and L, and the foot labeled L.
  • Using either white glue, hot glue, or tape, secure the large popsicle stick to the back of the monkey, centering it on the monkey’s body.

 

Back of Dancing Monkey

 

Construction Instructions for Non-Moveable Monkeys

 

Supplies

  1. You’ll need the printable. You can either print it on cardstock or print it on regular paper.
  2. Jumbo popsicle sticks.
  3. White Glue or Hot Glue

Assembly

  1. Cut out a monkey.
  2. Flip the monkey onto its face.
  3. Glue a jumbo popsicle stick in the center of the back of the monkey.  

 

Tada! That’s it! Enjoy the dancing monkeys!

The following two tabs change content below.

Katie

Hi! I’m Katie. I’m a mom with two toddlers born 14 months apart. Growing Up Goddesses is about empowering toddlers and parents with educational printables, activities, and articles.
23 Shares
Tweet
Share
Pin23
%d bloggers like this: